Käppala wastewater treatment plant situated on the island of Lidingö northeast of Stockholm is running a project during 2004 and 2005 with the purpose to map out the capacity of anaerobic digestion in the digesters that treat primary and excess sludge. The purpose of this thesis work, which is part of that project, was to characterize the present anaerobic digestion process and to investigate its capacity to treat other organic wastes such as restaurant waste and waste from water works. To decide the potential of both methane and biogas production from different substrates Batch laboratory tests were carried out. To imitate the anaerobic digestion process at Käppala continuous tests with small scale reactors were carried out. These reactors were later fed with restaurant waste.The Batch laboratory tests showed that primary sludge had a potential biogas and methane production of 0,62 and 0,35 Ndm3/g VS respectively after 40 days of digestion.

In the process laboratory of Metso minerals (Sala) AB, continuous tests have been made with a laboratory unit High-Rate thickener. The tests are made in order to compare three methods of thickening techniques of suspended solids. The three techniques are High-Rate thickening, conventional thickening and lamella thickening. The High-Rate and the conventional trials are based on a continuous method, while the lamella thickener is based on batch trials. Because the lamella thickener is based on batch trials and there were some optimization problems with the adding point of the flocculant at the continuous trials, it was not feasible to compare the lamella thickener with the other two thickener types.

The purpose of this study is to provide a description of how mathematics teachers in grades 3 choose to work with mathematics and how it affects of student performance in national tests. The categories I will use are outdoor education, textbooks, learning materials and problem solving. Laboratory materials can be everyday materials and educational materials in which pupils have an abstract understanding of the subject. This survey was conducted through interviews and observations. The survey was also conducted in relation to student performance in national math tests.

Different field tests are currently used in a wide extent in different levels of soccer teams. To be able to assess the players? physiological status the tests must have high validity, reliability and external validity. Many different tests have been developt, but currently only five of these tests are most commonly used: Yo-Yo intermittent recovery test (YIRT), Yo-Yo intermittent endurance test (YIET), Multi-sprint-test, Beep-test and Cooper-test. Presently there is no definitive conclusion regarding which of these tests is most suitable for soccer players.

High levels of ammonia in grass silage have been up for discussion by Swedish advisers. One reason is that it is more difficult for the rumen-microbes to utilise high levels of ammonia. A low level of ammonia is also good because if the cattle can use more of the protein in the silage, they don?t need so much protein concentrate. That is very good for the economy at the farm, and it is also good for the environmental problems caused by high levels of ammonia. In this project, 24 samples of silage have been taken at 20 different farms in the south west of Sweden.

Research indicates that a more hands-on education in mathematics could improve how students relate to mathematics. Laboratory mathematics is a way of making mathematics more concrete.  How is the purpose of laboratory mathematics perceived? This thesis has its focus on the pupils? perceptions of the purpose of laboratory mathematics, but the intention of the teacher involved is also investigated. The main research questions asked were:What is the teacher's definition of laboratory mathematics?Which is the teacher's purpose in using laboratory education?How do the students perceive the purpose of the laboratory teaching of mathematics?To answer the questions, I conducted a series of qualitative interviews.

Most of the city of Uppsala rests on postglacial clay with a varying content of sulphur. The sulphur occurs naturally in the clay in reduced form as sulphide and the clay is for that reason usually called ?sulphide clay?. Excavation during construction activities gives rise to large amounts of excavation material, of which the sulphide clay is a considerable part.When the clay is exposed to air and water, an oxidation of the sulphides occurs which may produce an acid leachate and the mobilisation of heavy metals bound in the clay or underlying material. The aim of the work has been to improve our understanding of the behaviour of sulphide clays and produce a basis for risk assessment in the future handling of excavation material with high sulphide content.

Within all industries, there is a change in working time required; this also includes the construction sector. However, the way construction sectors are differentiated is by not having been given the opportunity to be practiced or tested.  The aim of this thesis that we have done in collaboration with the Concrete Industry was to investigate the possibility of developing an automated method for quality assurance of SKB at the site. The idea is to make the O-funnel to be more utilized and therefore ensuring that the appropriate concrete quality is provided which eventually would lead to a better development in the production process.The project has involved theoretical work and laboratory experiments. The theoretical work gave us a good foundation at the beginning of the project. After gathering the information and material, the laboratory experiments began by SCC in their laboratory in Hammarby. The collected data from the various laboratory tests formed the foundation for trying to relate measurements for consistency of SCC with each other and therefore find out how measurements from O-funnel varies with different concrete mixtures.

In the current situation there is not much written about assessment of laboratory work, and the majority of the working physics teachers are retiring and there are only a few newly qualified physics teachers. The purpose of this thesis is to examine how physics teachers assess laboratory work within upper secondary schools, with Gy2011 in mind. The new grade system, Gy2011, has a larger focus on the laboratory work then the earlier system Lpf 94. Skolverket has in their man-ual with examples of assessment two different sorts of laboratory experiments. The first assess-ment is regarding the planning of a laboratory work and the other about how able the pupil exe-cutes laboratory work.

In the current situation there is not much written about assessment of laboratory work, and the majority of the working physics teachers are retiring and there are only a few newly qualified physics teachers. The purpose of this thesis is to examine how physics teachers assess laboratory work within upper secondary schools, with Gy2011 in mind. The new grade system, Gy2011, has a larger focus on the laboratory work then the earlier system Lpf 94. Skolverket has in their man-ual with examples of assessment two different sorts of laboratory experiments. The first assess-ment is regarding the planning of a laboratory work and the other about how able the pupil exe-cutes laboratory work.

This report deals with the performance of a batch flow treatment of landfillleachate compared with a continuous flow system. The parameters in focus were total Kjeldahl nitrogen (TKN), BOD5 and COD. The pilot-scale experiment used eight barrels with a volume of 150 liters. Each barrel was constructed differently concerning its flow, its bed material grain size and its presence of plants or not. Four of the barrels worked in batch mode, thus four in continuous flow mode.

The students are usually eager to develop their mathematical learning. However, the Skolverket can see that this eagerness passes in the early years of school. A study shows that a varied mathematical education creates enthusiasm to learn, which can decrease the negative view of mathematics.The purpose of this study is to see how five pedagogues use laboratory mathematics, their approaches to laboratory mathematics as well as to find out their role in the laboratory education. The result of the study is based on interviews with the pedagogues, who are all teachers for students in year F-3. All of the pedagogues work in a laboratory way, but to different extents.The study shows that the pedagogues aim to make the mathematics as concrete and everyday as possible.

Syftet med denna litteraturgenomgång var att presentera några av de vanligast förekommandelaboratorietesterna som används idag vid utvärdering av spermakvalité hos hingstar. Engranskning har också gjorts för att försöka utröna om det går att förutse hingstars fertilitetutifrån resultaten av dessa tester. De metoder som presenteras analyserar motilitet, morfologioch funktion hos spermierna i ett ejakulat. För att kunna fullfölja en befruktning krävs det attspermien uppfyller vissa kriterier. Detta för att kunna ta sig fram till äggcellen och smältasamman med denna och bilda ett embryo.

In the last decades, high speed cutting has become an attractive technology in the wood industry. The possibility of reducing global costs in addiction with an increase in productivity, were the main reasons for the enlargement of the use of this technology. As usual, these advantages are accompanied by disadvantages that should be carefully analyzed. If on the one hand cutting forces are reduced with increasing cutting speeds, on the other hand, the centrifugal forces affecting the tool are higher. Exposed to such high loads, there is a considerable risk of tool failure that embeds hazards for both machine and workers.

The market for heavy duty engines is constantly requiring engines that should be more andmore powerful, while still maintaining low fuel consumption. As a result of increasing enginepower, the engine and coolant temperature increases as well due to insufficient coolingperformance (because of design issues, cost etc.).Also, emission legislations, both current and future, require more and more measures to betaken by engine manufacturers. One way of meeting the legislations is the use of cooled EGR(Exhaust Gas Recirculation), which also lead to increased coolant temperatures.Both these factors also naturally lead to increased engine oil temperatures, the consequencesof which are not thoroughly investigated.This thesis project aims to investigate effects of high temperatures on engine oil degradation,with focus on the greatest degradation process: oxidation. To do this several engine runs havebeen performed on a 310 hp engine with EGR to see what happens to the engine oil in a realengine when exposed to high temperatures. During the tests oil samples have been taken andanalysed for important parameters.As a complement to these engine tests some laboratory oxidation testing have also beenperformed, to be able to compare engine test data with laboratory tests.One goal of the project was to try to formulate an empirical oxidation model, which would beable to predict oil oxidation levels in an engine, given any running parameters.